MOULD PROTECTIVE, 400ML

Mould protective is a corrosion inhibitor, has been specially formulated for application to mould surfaces after their use to remove any surface moisture and to protect the mould against corrosion during storage. Mould Protective protects metals and alloys, offering temporary conservation of metal parts during storage. It displaces and seals out water and moisture. Does not contain silicones. Easily moulded off. All injection mould tools, blow mould tools, extrusion dies and metal components requiring corrosion protection.

• 400ml fill size
• Yellow colour
• Density is 0.740 at 20°C
• Flash point is -4°C
• 100h salt spray resistance active product
• Drying time active product cont. film is 10min
• Water separability (ASTM D 1401) NaCl displaced

Hinweise

Stored at normal ambient temperatures and has a shelf life of not less than 6 years with correct storage. Aerosols should always be stored below 50°C, away from direct heat and flame.