EJECTOR PINLUBRICANT FG, 400ML

Ejector Pin Lubricant FG is a unique blend of highly refined mineral oils, extreme pressure additives and de-watering and anti-corrosion agents. Specifically developed for use on Ejector Pins and Locator Plugs, where a long-lasting, high cling release film is required. The heavy duty lubricating film offers outstanding performance under conditions of extreme pressure and loading on all moving and mechanical parts. Presented as a completely clear, hard-working film, Ejector Pin Lubricant is non-staining and will not fling off the moving part and is not displaced under high pressure/load operating conditions. Apply directly onto the part to be treated. The residual film will displace moisture and provide excellent lubrication and protection against corrosion.

• 400ml fill size
• Mould tool lubricant
• Clear, oily liquid appearance
• Characteristic hydrocarbon odour
• SG at 20°C is 0.83
• Temperature range from -25°C at 250°C
• Soluble in hydrocarbon solvents, insoluble in water
• Recommended Solvents are Ambersil solvent cleaner FG, Ambersil Industrial Degreaser FG
• Classified as extremely flammable under current EC regulations

Hinweise

Stored at normal ambient temperatures and has a shelf life of not less than 6 years with correct storage. Aerosols should always be stored below 50°C, away from direct heat and naked flame.