DRV8816PWP .

The DRV8816PWP is a dual half h-bridge Motor Driver provides a versatile power driver solution with two independent 1/2-H bridge drivers. The device can drive one brushed DC motor or one winding of a stepper motor, as well as other devices like solenoids. A simple INx/ENx interface allows easy interfacing to controller circuits. The output stages use N-channel power MOSFETs configured as 1/2-H-bridges. The DRV8816 is capable of peak output currents up to ±2.8A and operating voltages up to 38V. An internal charge pump generates needed gate drive voltages. A low-power sleep mode is provided which shuts down internal circuitry to achieve very-low quiescent current draw. This sleep mode can be set using a dedicated nSLEEP pin. Internal protection functions are provided for UVLO, charge pump fault, OCP, short-to-supply protection, short-to-ground protection, over-temperature warning and over-temperature shutdown. Fault conditions are indicated through a nFAULT pin.

• H-bridge motor driver individual
• Low-power sleep mode
• 100% PWM Supported
• Configurable over-current limit
• VBB under-voltage lockout (UVLO) protection
• Charge pump under-voltage (CPUV) protection
• Over-current Protection (OCP) protection
• Short-to-supply protection (STS) protection
• Short-to-ground protection (STG) protection
• Over-temperature Warning (OTW) protection
• Over-temperature Shutdown (OTS) protection
• Fault condition indication pin (nFAULT) protection
• Green product and no Sb/Br

Anwendungen

Motorantrieb & -steuerung, Industrie, Automatisierung & Prozesssteuerung

Hinweise

This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.