X-NUCLEO-OUT11A1

X-NUCLEO-OUT11A1 is an industrial digital output expansion board based on ISO808 for STM32 Nucleo. It provides a powerful and flexible environment for the evaluation of the driving and diagnostic capabilities of the ISO808 octal high-side smart power solid state relay with embedded galvanic isolation, in a digital output module connected to 0.7A industrial loads. The X-NUCLEO-OUT11A1 directly interfaces with the microcontroller on the STM32 Nucleo driven by GPIO pins and Arduino® R3 connectors. The galvanic isolation between the microcontroller and the process stage is guaranteed by the ISO808. The expansion board can be connected to either a NUCLEO-F401RE or a NUCLEOG431RB development board. It is also possible to evaluate a system composed of a X-NUCLEO-OUT11A1 stacked on other expansion boards. Suitable for programmable logic controllers applications.

• Operating range 9.2 to 36V, low power dissipation (RON(MAX) = 260mohm) and loss of ground protection
• Fast decay for inductive loads, undervoltage lock-out and overload and overtemperature protections
• Application board process side operating range from 10 (J10 open) to 33V (J9 closed)
• Application board logic side operating voltage 3.3 to 5V
• Green LEDs for outputs on/off status and yellow LED for output enable status signalization
• Red LED for common overheating and communication error diagnostic
• Direct control mode and synchronous control mode
• Process and logic supply rails reverse polarity protections
• Compatible with STM32 Nucleo development boards
• Equipped with Arduino® UNO R3 connectors