TJA1027T/20,118

The TJA1027T/20,118 is a LIN 2.2A/SAE J2602 Transceiver intended for in-vehicle sub-networks using baud rates up to 20kBd and is compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A and SAE J2602. The TJA1027 is pin-compatible with the TJA1020 and the TJA1021. The transmit data stream generated by the protocol controller is converted by the TJA1027 into an optimized bus signal shaped to minimize Electromagnetic Emissions (EME). The LIN bus output pin is pulled high via an internal termination resistor.

• 20kBd Baud rate
• Very low current consumption in sleep mode with remote LIN wake-up
• Passive behaviour in unpowered state
• Operational during cranking pulse - Full operation from 5V upwards
• Under-voltage detection

Hinweise

Bei normaler Handhabung sind alle Eingangs- und Ausgangspins gegen elektrostatische Entladung (ESD) geschützt. Für die Handhabung müssen geeignete Schutzvorkehrungen getroffen werden.