MAX4380EUT+T

The MAX4380EUT+T is an ultra small, low cost, 210MHz, single supply operational amplifier with rail to rail outputs and disable in 6 pin SOT-23 package. This unity gain stable device that combine high-speed performance, rail to rail outputs and high impedance disable mode. This device operate from a +4.5V to +11V single supply or from ±2.25V to ±5.5V dual supplies. The common mode input voltage range extends beyond the negative power supply rail (ground in single-supply applications). It requires only 5.5mA of quiescent supply current per op amp. It is an excellent solution in low power/low voltage systems that require wide bandwidth such as video, communications and instrumentation. It is used in set-top boxes, surveillance video systems, battery-powered instruments, analogue to digital converter interface, CCD imaging systems, video routing and switching systems, digital cameras, video-on-demand and video line driver.

• Low cost and high speed, 210MHz -3dB bandwidth
• Operating temperature range from -40°C to +85°C
• 55MHz 0.1dB gain flatness and a 485V/µs slew rate
• Disable mode places outputs in high-impedance state
• Input common-mode range extends beyond VEE
• Low differential gain/phase is 0.02%/0.08°
• Low distortion at 5MHz is -65dBc SFDR, -63dB total harmonic distortion
• Input offset voltage of 0.2mV at TA = +25°C
• Analog-to-Digital Converter Interface; Battery-Powered Instruments; CCD Imaging Systems; Digital Cameras; Set-Top Boxes;
• Surveillance Video Systems; Video Line Driver; Video Routing and Switching Systems; Video-on-Demand

Anwendungen

Signalverarbeitung

Hinweise

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party