ICS30L50N22POM1E1

ICS30L50N22POM1E1 is a proximity inductive sensor with E1-type approval. It is a complete family of high-performance inductive sensors that represents Carlo Gavazzi standard solution for outdoor mobile applications. Since they are installed on vehicles such as trucks or earth-moving equipment, they have to survive harsh environmental conditions, such as very high levels of shock and vibrations, low and high temperatures, high-level radio frequency noise, and frequent washing cycles with liquid cleaners and degreasers to remove grease and oils. Extended power supply ranges from 8 to 60VDC, to allow reliable operation in mobile equipment, where the power source is often only a conventional vehicle battery, requiring a very low voltage in some particular situations. It is used in applications such as trucks, earth-moving equipment, agriculture machines, mobile cranes, and buses.

• Less machine downtime, high EMC standards, load-dump protection
• Easy to install, high precision, product traceability
• Inductive sensor, cylindrical stainless steel housing
• M30 housing, housing with thread length of 50mm, non-flush detection principle
• ICS30 non-flush: 22mm (extended range), PNP – normally open output
• M12 plug connection, ripple is 10%
• No load supply current is 10mA, power on delay is 50ms
• Output current is 200mA, off-state current is 500μA
• Short-circuit, inductive load, overload, reverse polarity and transients protection
• Operating ambient temperature range from -40°C to +85°C