MAX9119EXK+T

MAX9119EXK+T is a nanopower comparator. The unique design of the output stage limits supply-current surges while switching, virtually eliminating the supply glitches typical of many other comparators. This design also minimizes overall power consumption under dynamic conditions. It has a push-pull output stage that sinks and sources current. Large internal-output drivers allow rail-to-rail output swing with loads up to 5mA. Applications include 2-cell battery monitoring/management, ultra-low-power systems, mobile communications, notebooks and PDAs, threshold detectors/discriminators, sensing at ground or supply line, telemetry and remote systems, medical instruments.

• Guaranteed to operate down to +1.6V
• Input voltage range extends 200mV beyond-the-rails
• Crowbar-current-free switching, internal hysteresis for clean switching
• No phase reversal for overdriven inputs
• Supply voltage range from 1.6 to 5.5V at TA=+25°C, inferred from the PSRR test
• Supply current is 0.60µA at TA=+25°C, VCC=1.6V
• Input bias current is 0.15nA at TA=+25°C
• Power-supply rejection ratio is 0.1mV/V at VCC=1.6V to 5.5V, TA=+25°C
• 5 SC70-5 package
• Operating temperature range from -40°C to +85°C

Hinweise

Aufgrund der Marktnachfrage nach diesem Produkt kommt es zu längeren Lieferzeiten. Liefertermine weichen möglicherweise ab. Das Produkt ist von Rabattaktionen ausgenommen.

Hinweise

Produkte von ADI sind (und werden) ausschließlich für den Gebrauch durch den Kunden autorisiert (und verkauft) und dürfen nicht weiterverkauft oder anderweitig an Dritte weitergegeben werden.