MAX6126AASA25+

The MAX6126AASA25+ is an ultra-low-noise, high-precision, low-dropout Voltage Reference for high-resolution A/D and D/A converters. This family of voltage references feature curvature-correction circuitry and high-stability, laser-trimmed, thin-film resistors that result in 3ppm/°C (maximum) temperature coefficients and an excellent ±0.02% (maximum) initial accuracy. The proprietary low-noise reference architecture produces a low flicker noise of 1.3μVP-P and wideband noise as low as 60nV/√Hz (2.048V output) without the increased supply current usually found in low-noise references. Improve wideband noise to 35nV/√Hz and AC power-supply rejection by adding a 0.1μF capacitor at the noise reduction pin. The MAX6126 series mode reference operates from a wide 2.7 to 12.6V supply voltage range and load-regulation specifications are guaranteed to be less than 0.025Ω for sink and source currents up to 10mA.

• Ultralow 1.3µVP-P noise (0.1 to 10Hz, 2.048V output)
• Wide (VOUT + 200mV) to 12.6V supply voltage range
• Low 200mV (maximum) dropout voltage
• 380µA Quiescent supply current
• 10mA Sink/source-current capability
• Low 20ppm/1000h long-term stability
• 0.025Ω Maximum load regulation
• 20µV/V (maximum) Line regulation
• Force and sense outputs for remote sensing
• Automated Test Equipment (ATE); Digital Voltmeters; High-Accuracy Industrial and Process Control;
• High-Accuracy Reference Standard; High-Resolution A/D and D/A Converters; Precision Current Sources

Anwendungen

Messtechnik, Verbrauchsmessung, Industrie, Automatisierung & Prozesssteuerung

Hinweise

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party