Menge | Preis (ohne MwSt.) |
---|---|
2500+ | 3,170 € |
Produktspezifikationen
Produktbeschreibung
The MAX3089EESD+T is a ±15KVESD protected, fail-safe, high speed RS485/RS422 transceiver in 14 pin NSOIC package. It contains one driver and one receiver. The device features fail-safe circuitry which has a logic high receiver output when the receiver inputs are open or shorted. This means that the receiver output will be logic high if all transmitters on a terminated bus are disabled (high impedance). MAX3089EESD+T slew rate is selectable between 115Kbps, 500Kbps and 10Mbps by driving a selector pin with a single three-state driver. The transmitter output and receiver input is protected by ±15KV using human body model with enhanced ESD protection. This transceiver typically draws 375μA of supply current when unloaded or when fully loaded with the drivers disabled. It has a 1/8 unit load receiver input impedance that allows up to 256 transceivers on the bus.
- Supply voltage range from 4.75V to 5.25V
- Operating temperature range from -40°C to 85°C
- Selectable between half duplex and full duplex operation
- True fail-safe receiver while maintaining EIA/TIA485 compatibility
- 1nA low current shutdown mode
- Features receiver/driver enable function
- Phase controls to correct for twisted pair reversal
Anwendungen
Kommunikation & Netzwerke, Industrie
Hinweise
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
Hinweise
ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party
Technische Spezifikationen
RS422- / RS485-Transceiver
1
10Mbps
5.25V
14Pin(s)
±15kV (HBM)
-40°C
-
MSL 1 - unbegrenzt
1Receivers
Halbduplex, Vollduplex
4.75V
NSOIC
256
Offen, Kurzschluss
85°C
-
No SVHC (21-Jan-2025)
Technische Dokumente (1)
Alternativen für MAX3089EESD+T
1 Produkt(e) gefunden
Zugehörige Produkte
3 Produkte gefunden
Gesetzgebung und Umweltschutz
Land, in dem der letzte Fertigungsprozeß ausgeführt wurde.Herkunftsland:Thailand
Land, in dem der letzte Fertigungsprozeß ausgeführt wurde.
RoHS
RoHS
Produkt-Konformitätszertifikat