ADP165ACBZ-1.8-R7

ADP165ACBZ-1.8-R7 is a very low quiescent current, low dropout (LDO), linear regulator that operates from 2.2V to 5.5V and provides up to 150mA of output current. The low 120mV dropout voltage at a 150mA load improves efficiency and allows operation over a wide input voltage range. It is specifically designed for stable operation with tiny 1µF ±30% ceramic input and output capacitors to meet the requirements of high performance, space constrained applications. The ADP165 also includes a switched resistor to discharge the output automatically when the LDO is disabled. Short-circuit and thermal overload protection circuits prevent damage in adverse conditions. Applications include portable and battery-powered equipment, post dc-to-dc regulation, portable medical devices, wireless sensor network (WSN) devices.

• Stable with 1µF ±30% ceramic input and output capacitors
• Input voltage range from 2.2V to 5.5V, logic control enable
• Current-limit and thermal overload protection, integrated output discharge resistor
• Operating supply current is 590nA typical at (IOUT = 0µA, TA = 25°C)
• Shutdown current is 50nA typical at (EN = GND, TA = 25°C)
• Fixed output voltage accuracy is +1% maximum at (IOUT = 10mA, TA = 25°C)
• Dropout voltage is 45mV typical at (IOUT = 10mA, TA = 25°C)
• Output noise is 105µV rms typical at (10Hz to 100KHz, VIN = 5V, VOUT = 3.3V)
• 1.8V output voltage, PSRR is 60dB typical at (100Hz, VIN = 5V, VOUT = 3.3V)
• Operating ambient temperature range from -40°C to +125°C, 4-ball WLCSP package

Hinweise

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party