ADA4960-1ACPZ-R2

ADA4960-1ACPZ-R2 is a high-performance, differential amplifier optimized for RF and IF applications. It achieves better than 63dB IMD3 performance for frequencies up to and beyond 1GHz, making it an ideal driver for 8-bit to 10-bit giga-sample analogue-to-digital converters (ADCs). The buffered inputs of the ADA4960-1 isolate the gain-setting resistor (RG) from the signal inputs, maintaining a constant 10Kohm input resistance, easing matching and input drive requirements. The ADA4960-1 has a nominal 150 ohm differential output impedance. The ADA4960-1 is optimized for wideband, low-distortion performance for frequencies up to and beyond 1GHz. It is used in applications such as differential ADC drivers for giga-sample ADCs GBPS line drivers with pre-emphasis, high-speed data acquisition, electronic surveillance countermeasures, pulse capture and conditioning, oscilloscopes, satellite communications, single-ended-to-differential converters, RF/IF gain blocks.

• 5000MHz typical -3dB bandwidth at (AV = 6dB, VOUT ≤ 1V p-p, T = 25°C)
• Single resistor programmable gain from 0dB to 18dB
• Slew rate is 8700V/µs typical at (AV = 6dB, VOUT = 2V step, 20% to 80%)
• Settling time is 1ns typical at (1V step to 1%, T = 25°C)
• Overdrive recovery time is 6.7ns typical at (VIN = 1V to 0V step, AV = 12dB, VOUT ≤ 1%)
• Supply voltage is 5V typical at (T = 25°C), quiescent current is 60mA typ at (ENB high, T = 25°C)
• DC level translation, 300MHz typ bandwidth for 0.1dB flatness at (VOUT ≤ 1.0V p-p)
• Input bias current is -20µA typical at (-40°C to +85°C)
• Noise spectral density (RTI) is 4.8nV/√Hz typical at (AV = 6dB, T = 25°C)
• Operating temperature range from -40°C to +85°C, 16-lead LFCSP package

Hinweise

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party