AD8655WARMZ-RL

AD8655WARMZ-RL is a low-noise, precision CMOS amplifier. It leverages the Analog Devices DigiTrim® technology to achieve high dc accuracy. It provides low noise (2.7nV/√Hz at 10KHz), low THD + N (0.0007%), and high precision performance (250µV max over VCM) to low voltage applications. The ability to swing rail-to-rail at the input and output enables designers to buffer analogue-to-digital converters (ADCs) and other wide-dynamic range devices in single-supply systems. The high precision performance of the device improves the resolution and dynamic range in low-voltage applications. Audio applications, such as microphone pre-amps and audio mixing consoles, benefit from the low noise, low distortion, and high output current capability of the device to reduce system-level noise performance and maintain audio fidelity. It is used in applications such as ADC and DAC buffers, audio, industrial controls, precision filters, digital scales, automotive collision avoidance, and PLL filters.

• Rail-to-rail input/output, unity gain stable, qualified for automotive applications
• Offset voltage is 50µV typical at (VCM = 0V to 5V, VS = 5V, VCM = VS/2, TA = 25°C)
• Offset voltage drift is 0.4µV/°C typical at (VS = 5V, VCM = VS/2, TA = 25°C)
• Input bias current is 1pA typical at (VS = 5V, VCM = VS/2, TA = 25°C)
• Common-mode rejection ratio is 100dB typical at (VS = 5V, VCM = VS/2, TA = 25°C)
• Supply current/amplifier is 3.7mA typical at (VS = 5V, VCM = VS/2, TA = 25°C)
• Gain bandwidth product is 28MHz typical at (VS = 5V, VCM = VS/2, TA = 25°C)
• Slew rate is 11V/µs typical at (RL = 10Kohm, VS = 5V, VCM = VS/2, TA = 25°C)
• Input voltage noise density is 4nV/√Hz typical at (VS = 5V, VCM = VS/2, TA = 25°C)
• Operating temperature range from -40°C to +125°C, 8-lead MSOP package

Hinweise

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party