AD5625RBCPZ-R2

AD5625R is a low power, quad channel, 12-bit, buffered voltage-out DAC with/without an on-chip reference. The on-chip reference is off at power-up, allowing the use of an external reference. The internal reference is enabled via a software write. It requires an external reference voltage to set the output range of the DAC. The device incorporates a power-on reset circuit that ensures that the DAC output powers upto 0V (POR = GND) or midscale (POR = VDD) and remains there until a valid write occurs. The on-chip precision output amplifier enables rail-to-rail output swing. It is used in applications such as process control, data acquisition systems, portable battery-powered instruments, digital gain and offset adjustment, programmable voltage and current sources, programmable attenuators.

• Power supply voltage range from 2.7V to 5.5V
• Guaranteed monotonic by design, per channel power-down
• Hardware LDAC and CLR functions
• Relative accuracy is ±0.5LSB typical at (VDD = 2.7V to 5.5V)
• Differential nonlinearity is ±0.25LSB maximum at (VDD = 2.7V to 5.5V)
• Gain temperature coefficient is ±2.5ppm typical at (VDD = 4.5V to 5.5V)
• Offset error ±1mV typical at (VDD = 4.5V to 5.5V)
• Gain error is ±0.1% FSR typical at (VDD = 4.5V to 5.5V)
• Short-circuit current is 30mA typical at (VDD = 4.5V to 5.5V)
• Operating temperature is -40°C to +105°C, package style is 10-lead LFCSP

Hinweise

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party