AD5422AREZ-REEL

AD5422 is a single channel 16bit, monotonicity, serial input, current source and voltage output DAC, HART connectivity. This offering a programmable current source and programmable voltage output designed to meet the requirements of industrial process control applications. The LFCSP version of this product has a CAP2 pin so that the HART signals can be coupled onto the current output of the AD5422. Voltage output is provided from a separate pin that can be configured to provide 0V to 5V, 0 V to 10V, ±5V, or ±10V output ranges. Analog outputs are short and open-circuit protected and can drive capacitive loads of 1µF. The flexible serial interface is SPI- and MICROWIRE™-compatible and can be operated in 3-wire mode to minimize the digital isolation required in isolated applications. The device also includes a power-on-reset function, ensuring that the device powers up in a known state. Application includes process controls, actuator controls, PLC.

• Flexible serial digital interface, on-chip output fault detection
• Optional regulated DVCC output
• Asynchronous clear function
• Typical total unadjusted error is ±0.01% FSR (TA = 25°C, AVDD = 10.8V to 26.4V)
• Relative accuracy is 0.008% FSR maximum at (AVDD = 10.8 to 26.4V)
• 90ppm FSR typical output voltage drift vs. time (drift after 1000 hours, TA = 125°C)
• 90µV/V typical DC PSRR (AVDD = 10.8V to 26.4V
• Gain error is +0.07% FSR maximum at (AVDD = 10.8V to 26.4V)
• Operating temperature range from -40°C to +105°C
• 24 lead TSSOP-EP package

Hinweise

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party