NON-SILICONE RELEASE FG, 400ML

Non-Silicone Release FG is a NSF M1 & H1 registered, nonsilicone mould release agent. Based on ‘edible’ vegetable oils and has been formulated for the release of many commonly used types of polymers in the food processing industry. Provides a ‘wet’ non-silicone release film for the release of polymers utilised in injection moulding, vacuum forming and many other moulding and forming processes. Ideal for use in the production of food quality packaging. Will not build up in the mould and helps to improve surface finish, reduce rejects and increase production.

• 400ml fill size
• Clear, colourless liquid
• Hydrocarbon odour
• NSF M1 & H1 specifications/approvals
• 0.75 SG at 25°C and 3bar pressure at 25°C
• 0.9g/sec discharge rate
• Operational temperature range up to 200°C
• Soluble in solvents, insoluble in water
• Classified as extremely flammable under current EC regulations
• Halal certified product AN001183

Hinweise

Stored at normal ambient temperatures and has a shelf life of not less than 6 years with correct storage. Aerosols should always be stored below 50°C, away from direct heat and flame.