TWR-K60D100M

The TWR-K60D100M is a tower controller module compatible with the NXP tower system. It can function as a stand alone, low cost platform for the evaluation of the Kinetis K60 family of microcontroller (MCU) devices. The controller module features the Kinetis K60 low power microcontroller based on the ARM Cortex‐M4 architecture with USB 2.0 full speed OTG controller and 10Mbps/100Mbps Ethernet MAC. The tower controller module can also be combined with other NXP tower peripheral modules to create development platforms for a wide variety of applications.

• K60DN512 in a 144 MAPBGA with 100MHz operation
• Touch tower plug in socket
• On board JTAG debug circuit (OSJTAG) with virtual serial port
• Three axis accelerometer (MMA78451Q)
• Tower connectivity for access to USB, Ethernet, RS232/RS485, CAN, SPI, I²C, Flexbus, etc
• Four capacitive touch pads
• 3.3V or 1.8V operation
• Battery holder for 20mm lithium battery (e.g. 2032, 2025)
• SD card slot
• Isolation for low power measurements

Anwendungen

Tragbare Geräte, Industrie, Medizinelektronik, Gebäudeautomatisierung, Sicherheitstechnik

Lieferumfang

TWR‐K60D100M board, 3ft USB cable, CR2025 coin cell battery.

Hinweise

Aufgrund der Marktnachfrage nach diesem Produkt kommt es zu längeren Lieferzeiten. Liefertermine weichen möglicherweise ab