AD9201ARSZ

AD9201 is a complete dual channel, 20MSPS, 10bit CMOS ADC. It is optimized specifically for applications where close matching between two ADCs is required (e.g., I/Q channels in communications applications). The 20MHz sampling rate and wide input bandwidth will cover both narrowband and spread-spectrum channels. Each ADC incorporates a simultaneous sampling sample-and-hold amplifier at its input. The analogue inputs are buffered; no external input buffer op-amp will be required in most applications. The ADC is implemented using a multistage pipeline architecture that offers accurate performance and guarantees no missing codes. The outputs of the ADC is ported to a multiplexed digital output buffer. It is manufactured on an advanced low cost CMOS process, operates from a single supply from 2.7V to 5.5V, and consumes 215mW of power (on 3V supply).

• Complete dual matching ADC
• On-chip analogue input buffers, on-chip reference
• Over nine effective bits, no missing codes guaranteed
• Conversion rate is 20MHz maximum at (AVDD = +3V, DVDD = +3V)
• Differential nonlinearity is ±0.4LSB typical at (AVDD = +3V, DVDD = +3V)
• Integral nonlinearity is 1.2LSB typical at (AVDD = +3V, DVDD = +3V)
• Supply current is 71.6mA typical at (AVDD = +3V, DVDD = +3V)
• Signal-to-noise and distortion is 57.3dB typical at (f = 3.58MHz, AVDD = +3V, DVDD = +3V)
• Operating temperature is -40°C to +85°C
• Package style is 28-lead SSOP

Hinweise

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party