Low

MC9S12XDP512CAG - 

Mikrocontroller, HCS12X, 16bit, 40 MHz, 512 KB, 32 KB, 144 Pin(s)

NXP MC9S12XDP512CAG

Abbildung ggf. ähnlich. Alle Angaben ohne Gewähr. Ausschlaggebend sind die Produktinformationen des Herstellers.

Hersteller:
NXP NXP
Herstellerteilenummer:
MC9S12XDP512CAG
Bestellnummer:
1165809
Produktsortiment
HCS12 Microcontrollers
Technisches Datenblatt:
(EN)
Technische Dokumentation anzeigen

Produktspezifikationen

:
144Pin(s)
:
32KB
:
2.35V
:
2.75V
:
119I/O(s)
:
HCS12 Microcontrollers
:
Stückweise
:
40MHz
:
16bit
:
I2C, SCI, SPI
:
HCS12X
:
LQFP
:
512KB
:
MSL 3 - 168 Stunden
Finden Sie ähnliche Produkte Passen Sie die Auswahlkriterien oben an, um nach ähnlichen Artikeln zu suchen.

Produktbeschreibung

The MC9S12XDP512CAG is a 16-bit Microcontroller based on enhanced HCS12X CPU (40MHz bus) with CISC architecture operates at a maximum frequency of 80MHz. The device incorporates 512kB internal flash, 32kB internal RAM, 4kB EEPROM, 24-channel 10-bit A/D converter and 119 general-purpose I/O pins. This device also features peripherals like two inter-integrated circuit (IIC) bus module, two multi-scalable controller area networks (MSCAN) CAN 2.0 A/B software compatible modules, six serial communications interface (SCI) and three serial peripheral interface modules (SPI). The MC9S12XD family features the performance boosting XGATE co-processor. The XGATE, which is programmable in C language, has an instruction set which is optimized for data movement, logic and bit manipulation instructions. It runs at twice the bus frequency of the S12X and off-loads the CPU by providing high speed data transfer between any peripheral module, RAM and I/O ports.
  • Upward compatible with MC9S12 instruction set
  • Interrupt stacking and programmer's model identical to MC9S12
  • Instruction queue
  • Enhanced indexed addressing
  • Enhanced instruction set
  • External bus interface (EBI)
  • Module mapping control (MMC)
  • Interrupt controller (INT)
  • Debug module to monitor HCS12X CPU and XGATE bus activity
  • Background debug mode (BDM)
  • Periodic interrupt timer (PIT)
  • Clock and reset generator (CRG)
  • Low noise/low power Pierce oscillator
  • Enhanced capture timer - 16-bit main counter with 7-bit prescaler
  • 8 PWM (pulse-width modulator) channels
  • On-chip voltage regulator
  • Low-voltage detect (LVD) with low-voltage interrupt (LVI)
  • Power-on reset (POR) circuit
  • Low-voltage reset (LVR)
  • Ultra low-power wake-up timer

Anwendungen

Industrie

Zugehörige Produkte